Everything customers ask us most, plus what to check if your alarm, cameras or entry system are playing up.
Only once you and your property are safe should you worry about your system itself. The checks below cover the faults we get asked about most.
Check the keypad's battery indicator first, and try your master code. If it keeps sounding after re-arming, there's likely a triggered zone, so check for an open door or window before assuming a fault.
Check which zone the panel reports. The usual culprits are pets, insects on a PIR lens, or curtains/blinds moving in a draught within a sensor's view.
Check the camera's power connection and your home Wi-Fi/router first, since most "offline" cameras are a network issue rather than a camera fault.
Check the system has power and the strike/lock wiring hasn't come loose. If you're fully locked out with no power, don't force the door. Call us for a same-day fix.
Usually a low-battery warning on the backup battery, not a real detection. Replace to the manufacturer's spec, or call us if it's mains-wired and won't stop.
Battery-backed alarms and cameras keep running through short outages. If it's a longer cut, check backup battery health once power's restored. We can test this on a visit.
Yes, every CCTV system we fit comes with a phone app so you can check in live or review footage from anywhere.
Both, though we generally recommend wired cameras for reliability, since as electricians we can run proper cabling during install rather than relying on Wi-Fi signal strength around the house.
Depends on your storage choice: local NVR storage typically holds 2–4 weeks of footage before overwriting, while cloud storage plans can be set to whatever retention period you need.
Yes, we set up smart alarms, cameras and lighting on one system so a triggered sensor can turn on lights and start recording automatically.
Yes, we install and configure Lutron, Lightwave, Hamilton and Aurora smart lighting systems alongside your alarm and cameras, so lighting scenes, occupancy simulation and camera-triggered lights all run from one system.
Yes. Sonos and similar whole-home audio integration, plus home cinema installation, often wired in during the same visit as your smart lighting or security work.
Yes, as part of the same visit or as a standalone job, mains-wired with battery backup, to current building regs.
Both options are available: most residential customers self-monitor via the app, but we can quote for professional 24/7 monitoring with police response if you'd rather have that.
Usually yes, provided the recorder has spare channels and storage capacity. We'll size the initial system with reasonable headroom if you mention you might expand later.
Most domestic CCTV and alarm installs are done in a single day. We'll confirm timing and give you a fixed quote after a short site visit.
Yes, all installations carry a minimum 12-month workmanship warranty, on top of whatever the equipment manufacturer provides.
Yes, all our engineers are DBS checked, which matters given the nature of security work in and around your home.